This new development of the company OTEC grinds and polishes workpieces especially well in areas, where conventional techniques like e.g. robots fail. Through the tremendous speeds of the grinding or polishing medium (up to 16 m/s), this machine is particularly suitable for processing of corners, recesses, grooves, etc.. In this process, the workpieces are held by special jigs and then immersed in rapidly flowing grinding or polishing medium. The process times are extremely short – just 1 to 3 minutes. For example at workpieces made of aluminum, the roughness of Ra 0.9µm can be reduced to Ra 0.05µm in just 1 minute through a single step dry process.
During the process, the workpiece can be rotated or even angular movements can be performed. The new SF 3-200 stream finishing machine from OTEC is characterized by:

  • Very robust and strong construction
  • Powerful 50 KW main drive
  • Process container speed up to 150 rpm with a diameter of 2 metres
  • Three stations for workpiece holders; workpieces can be clamped pneumatically
  • Only for dry processing
  • Extremely short processing times
  • Automatic operation
  • Robot loading possible
Need Assistance?
For questions and enquiries about our products and services.

SPIRE PTE. LTD


No 1, Joo Koon Crescent
Singapore 629027

+65 6862 1403 / +65 6862 1406

Fax: +65 6898 4968

Email: spirepl@singnet.com.sg

Copyright 2018. SPIRE PTE. LTD. All Rights Reserved